Inlämning av Examensarbete / Submission of Thesis

Muhammad Ishfaq Khan BTH-AMT-EX--2012/D-04--SE, pp. 111. ING/School of Engineering, 2012.

The work

Författare / Author: Muhammad Ishfaq Khan
Titel / Title: Design of Experimental Setup for Hydrodynamic Thin Film Pressure Study
Översatt titel / Translated title: Design of Experimental Setup for Hydrodynamic Thin Film Pressure Study
Abstrakt Abstract:

A proposed experimental setup for study and demonstration of the pressure distribution and load capacity of hydrodynamic bearings was developed.

Various conceptual designs for producing thin full film lubrication conditions and enabling gap geometry control and pressure and force measurements were produced and assessed.

Relative motion for the interacting bearing surfaces was found promising to be achieved by a smooth rotating belt. A simple height control arrangement for the stationary surface is also found to be facilitating the gap control between the two surfaces.

Alternative direct and indirect techniques for measuring pressure and force were pointed out.

Topology and dimensions of the proposed design were suggested as a basis for a physical setup realization.

Populärvetenskaplig beskrivning / Popular science summary: A great deal of research work is being carried out on hydrdynamic bearings to improve their frictional eficeincy. All the research work that has been carried out is on the hydrodynamic bearings, which is prone to various nolinearities.
The thesis is a venture to genrate a simple experimental setup that may help to conduct the experimentation in simple and precise manner.
Ämnesord / Subject: Maskinteknik - Mechanical Engineering\General
Maskinteknik - Mechanical Engineering\Structural Mechanics
Maskinteknik - Mechanical Engineering\Structural Dynamics
Nyckelord / Keywords: Hydrodynamic Thin Layer, 1-D Reynolds Equation, Unit-Step Geometry.

Publication info

Dokument id / Document id: houn-8v7ee3
Program:/ Programme Masters Programme in Mechanical Engineering 120 ECTS
Registreringsdatum / Date of registration: 06/12/2012
Uppsatstyp / Type of thesis: Masterarbete/Master's Thesis (120 credits)


Handledare / Supervisor: Berhuvud, Ansel
Examinator / Examiner: Mats Walter
Organisation / Organisation: Blekinge Institute of Technology
Institution / School: ING/School of Engineering

+46 455 38 50 00
I samarbete med / In co-operation with: Blekinge Institute of Technology, Sweden.
Anmärkningar / Comments:

C/O Gaurav Bhupati, Minervagen 20.¨, Karlskrona, -Sweden.
Postal Code: 37141

Files & Access

Bifogad uppsats fil(er) / Files attached: bth2012khan.pdf (2032 kB, öppnas i nytt fönster)