Inlämning av Examensarbete / Submission of Thesis

Harikishan Mandalapu; Sandeep Karanamsetty BTH-AMT-EX--2007/D-10--SE, pp. 68. TEK/avd. för maskinteknik, 2007.

The work

Författare / Author: Harikishan Mandalapu, Sandeep Karanamsetty
Harikishan9@gmail.com
Titel / Title: Parameter analysis of creep models of PP/CaCo3 nanocomposites
Abstrakt Abstract:

The present report is about the parameter analysis of creep models of Nanocomposites (Isotactic polypropylene and CaCo3).The parametric analysis of the nanocomposites under creep was carried out, and the parameters related to creep model are determined by comparing to the experimental results. The influence of these parameters on the creep was studied. Using commercially available software ABAQUS, Finite Element Calculations were done for elastic and creep conditions. The results obtained from theoretical analysis were verified with the Experimental Results. Also Abaqus results are compared with the Experimental results.

Ämnesord / Subject: Maskinteknik - Mechanical Engineering\General
Maskinteknik - Mechanical Engineering\Structural Dynamics
Maskinteknik - Mechanical Engineering\Structural Mechanics
Nyckelord / Keywords: Creep strain, PP/CaCO3, Nanocomposites, FEM.

Publication info

Dokument id / Document id:
Program:/ Programme Masters programme in Mechanical Engineering, 60 points
Registreringsdatum / Date of registration: 06/07/2007
Uppsatstyp / Type of thesis: D-Uppsats/Magister/Master

Context

Handledare / Supervisor: Dr.Sharon Kao Walter
sharon.kao-walter@bth.se
Examinator / Examiner: Dr.Ansel Berghuvud
Organisation / Organisation: Blekinge Institute of Technology
Institution / School: TEK/avd. för maskinteknik
S-371 41 Karlskrona
+46 455 38 50 00
I samarbete med / In co-operation with: Blekinge Institute of Technology

Files & Access

Bifogad uppsats fil(er) / Files attached: bth_amt_ex_2007d10_se.pdf (493 kB, öppnas i nytt fönster)