Inlämning av Examensarbete / Submission of Thesis

Vijay Ravinath BTH-AMT-EX--2006/D-04--SE, pp. 54. TEK/avd. för maskinteknik, 2006.

The work

Författare / Author: Vijay Ravinath
Titel / Title: Study on the Vibrations in the Discharge Pipe of Oil Flooded Screw Compressor
Abstrakt Abstract:

Flow induced pulsation in piping are serious concern in refrigeration installations where noise and vibrations are critical factors. This report takes an insight look into the possible ways to minimise the noise and vibration due to pulsations.
A modification of the discharge piping was done to reduce the noise produced by pressure pulsation in oil flooded screw compressor. It gets complex while trying to deduce the natural frequency of complicated piping with branches and bends. FEMLAB was used as simulation software. Reflection of waveform in piping masks the real amplitude of the pressure pulsation. A method based on signal processing was employed to decompose the incident and reflected wave.

Ämnesord / Subject: Maskinteknik - Mechanical Engineering\Structural Mechanics

Nyckelord / Keywords: Screw Compressor, Pulsation, Ducts, Wave separation, FEMLAB.FAMOS.

Publication info

Dokument id / Document id:
Program:/ Programme Masters programme in Mechanical Engineering, 60 points
Registreringsdatum / Date of registration: 01/30/2006
Uppsatstyp / Type of thesis: D-Uppsats/Magister/Master


Handledare / Supervisor: Claes Hedberg
Examinator / Examiner: Dr.Ansel Berghuvud
Organisation / Organisation: Blekinge Institute of Technology
Institution / School: TEK/avd. för maskinteknik
S-371 41 Karlskrona
+46 455 38 50 00
I samarbete med / In co-operation with: Grasso GmbH Refrigeration Technology,Berlin,Germany
Anmärkningar / Comments:


Files & Access

Bifogad uppsats fil(er) / Files attached: bth_amt_ex_2006d04_se.pdf (679 kB, öppnas i nytt fönster)