Inlämning av Examensarbete / Submission of Thesis

Krzysztof Barela; Piotr Ciereszko , pp. 89. ING/School of Engineering, 2012.

The work

Författare / Author: Krzysztof Barela, Piotr Ciereszko
Titel / Title: Control System Design and Transmission Line Resonance Elimination of a 3-Phase Battery Charger
Abstrakt Abstract:

This paper addresses two problems which may occur during the operation of a MTM-HF traction battery charger produced by the company MicroPower AB: Firstly, high-power traction battery chargers are chiefly supplied from rectified 3-phase mains electricity, making them susceptible to resonant disturbances which occur in high-inductance power lines. These resonant disturbances increase the amplitude disturbances of the rectified DC voltage supplied to the battery charger, thus interfering with its operation. A method to suppress the resonant disturbances was devised using the inherent capability of a battery charger to draw a controlled current from the power lines. Secondly, Battery chargers operating near their maximum current capabilities are strongly affected by the ripple of the rectified supply voltage. In order to fully use the power supply, a control system was designed which minimizes the effect of that ripple on output current while ensuring that the desired value of output current is reached. Both of these methods were successfully tested using a simulated model of the MicroPower MTM-HF battery charger.

Ämnesord / Subject: Signalbehandling - Signal Processing
Elektroteknik - Electrotechnology
Nyckelord / Keywords: Battery charger, Line resonance, Current control

Publication info

Dokument id / Document id: houn-8yykpv
Program:/ Programme Magisterprogram i Elektroteknik / Master of Science in Electrical Engineering
Registreringsdatum / Date of registration: 10/11/2012
Uppsatstyp / Type of thesis: Masterarbete/Master's Thesis (120 credits)

Context

Handledare / Supervisor: Anders Hultgren
Examinator / Examiner: Sven Johansson
Organisation / Organisation: Blekinge Institute of Technology
Institution / School: ING/School of Engineering

+46 455 38 50 00
I samarbete med / In co-operation with: MicroPower AB

Files & Access

Bifogad uppsats fil(er) / Files attached: barela ciereszko post final.pdf (2112 kB, öppnas i nytt fönster)