böcker

Noise and Vibration Control Inc. Distance Laboratory

Books and Book Chapters

  1. Ingvar Gustavsson, J. Zackrisson, L. Håkansson, Chapter 11 { Distributed Laboratories Based on Open Source Technologies in Advances on remote laboratories and e-learning experiences, L. Gomes and J.Garcia-Zubia (ed.), University of Deusto, Bilbao, Spain, 2007, ISBN 978-84-9830-077-2.
  2. S. Johansson, L. Håkansson, I. Claesson, Chapter 100 { Aircraft Cabin Noise and Vibration Prediction and Active Control in HANDBOOK OF NOISE AND VIBRATION CONTROL, Malcolm J. Crocker (ed.), John Wiley & Sons, New York, 2007, ISBN 978-0-471-39599-7
  3. L. Håkansson, S. Johansson, I. Claesson, Chapter 81{ Machine Tool Noise, Vibration and Chatter Prediction and Control in HANDBOOK OF NOISE AND VIBRATION CONTROL, Malcolm J. Crocker (ed.), John Wiley & Sons, New York, 2007, ISBN 978-0-471-39599-7
  4. L. Håkansson, S. Johansson, M. Dahl, P. Sjösten, I. Claesson, Chapter 12 { Noise Canceling Headsets for Speech Communication in CRC Press Handbook on Noise Reduction in Speech Applications, Gillian M. Davis (ed.), CRC Press 2002 ISBN 0-8493-0949-2

Journals

  1. V. T. Vu, T. K. Sjögren, M. I. Pettersson, L. Håkansson, A. Gustavsson and L. M. H. Ulander, "RFI Suppression In Ultrawideband SAR Using Adaptive Line Enhancer", IEEE Geoscience and RemoteSensing Letters, Vol 7, No 4, 2010.
  2. H. Åkesson, T. Smirnova, I. Claesson, T. Lagö and L. Håkansson, "Estimation and Simulation of Nonlinear Dynamic Properties of a Boring bar", submitted for publication to the IJAV-International Journal of Acoustics and Vibration, June, 2009.
  3. I. Gustavsson, K. Nilsson, J. Zackrisson, J. Garcia-Zubia, U. Hernandez-Jayo, A. Nafalski, Z. Nedic, Ä O.Göl, J. Machotka, M. I. Pettersson, T. Lagö, L. Håkansson, "On objectives of instructional laboratories, individual assessment, and use of collaborative remote laboratories", IEEE TRANSACTIONS ON LEARNING TECHNOLOGIES, Vol 2, No 4, 2009.
  4. M. Larsson, S. Johansson, I. Claesson and L. Håkansson, "A Module Based Active Noise Control System for Ventilation Systems, Part II: Performance Evaluation", IJAV-International Journal of Acoustics and Vibration, 14(4), pp. 196-206, 2009.
  5. M. Larsson, S. Johansson, I. Claesson and L. Håkansson, "A Module Based Active Noise Control System for Ventilation Systems, Part I: Influence of Measurement Noise on the Performance and Convergence of the Filtered-x LMS Algorithm", IJAV-International Journal of Acoustics and Vibration, 14(4), pp. 188-195, 2009.
  6. H. Åkesson, T. Smirnova, and L. Håkansson, "Analysis of Dynamic Properties of Boring Bars Concerning Different Clamping Conditions ", Journal of Mechanical Systems & Signal Processing, 23(8), pp. 2629-2647, 2009.
  7. T. Smirnova, H. Åkesson, and L. Håkansson, "Dynamic Modeling of a Boring Bar Using Theoretical and Experimental Engineering Methods Part 2: Finite Element Modeling and Sensitivity Analysis", IJAV-International Journal of Acoustics and Vibration, 14(3), pp. 134-142, 2009.
  8. T. Smirnova, H. Åkesson, and L. Håkansson, "Dynamic Modeling of a Boring Bar Using Theoretical and Experimental Engineering Methods Part 1: Distributed-Parameter System Modeling and Experimental Modal Analysis", IJAV-International Journal of Acoustics and Vibration, 14(3), pp. 124-133, 2009
  9. I. Gustavsson, J. Zackrisson, K. Nilsson, J. Garcia-Zubia, L. Håkansson, I. Claesson, and T. Lagö,"A Flexible Instructional Electronics Laboratory with Local and Remote LabWorkbenches", International Journal of Online Engineering, Vol 4, No 2, 2008.
  10. H. Åkesson, T. Smirnova, I. Claesson and L. Håkansson, "On the Development of a Simple and Robust Active Control System for Boring Bar Vibration in Industry", IJAV-International Journal of Acoustics and Vibration, 12(4), pp. 139-152, 2007.
  11. I. Gustavsson, J. Zackrisson, H. Åkesson and L. Håkansson, "A Remotely Operated Traditional Electronics Laboratory", International Journal of Online Engineering, Vol. 2, No. 1, 2006.
  12. M. Winberg, S. Johansson, L. Håkansson, I. Claesson and T. Lagö, "Active Vibration Isolation in Ships: A Pre-Analysis of Sound and Vibration Problems", IJAV-International Journal of Acoustics and Vibration, 10(4), pp. 175-196, 2005
  13. L. Andrén, L. Håkansson, A. Brandt and I. Claesson, "Identification of Motion of Cutting Tool Vibration in a Continuous Boring Operation - Correlation to Structural Properties", Journal of Mechanical Systems & Signal Processing, 18(4), pp. 903-927, 2004
  14. L. Andrén, L. Håkansson A. Brandt and I. Claesson, \Identification of Dynamic Properties of Boring Bar Vibrations in a Continuous Boring Operation", Journal of Mechanical Systems & Signal Processing, 18(4), pp. 869-901, 2004.
  15. L. Andrén and L. Håkansson and I. Claesson, "Active control of machine tool vibration in external turning operations", Proceedings of The Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 217(B6), pp. 869-872, 2003.
  16. S. Johansson, L. Håkansson, P. Persson, and I. Claesson, "Active Control of Lateral Vibrations in a Railway Carriage", IJAV-International Journal of Acoustics and Vibration, 7(4), pp. 195-210, 2002
  17. I. Claesson, L. Håkansson, \Adaptive Active Control of Machine-Tool Vibration In a Lathe",IJAV-International Journal of Acoustics and Vibration, 3 (4), pp. 155-162, 1998.
  18. L. Håkansson, I. Claesson, P-O. Sturesson, \Adaptive Feedback Control of Machine-Tool Vibration based on The Filtered-x LMS International Journal of Low Frequency Noise, Vibration and Active Control, 17(4), pp. 199-213,1998.
  19. P. Sturesson, L. Håkansson, I. Claesson, \Identi¯cation of the Statistical Properties of the Cutting tool Vibrations in a Continuous Turning Operation - Correlation to Structural Properties" Journal of Mechanical Systems and Signal Processing, vol 11, no 3, pp 459-489, December 1997

Magazine articles

  1. T. Lagö, R. Zimmergren, A. Boyer, I. Claesson and L. Håkansson, "New Cutting Technology Provides Improved Workpiece Finish and Increased Tool Life", Sound and Vibration Magazine, October 2006.

 

Technical Reports

  1. .H. Åkesson, T. Smirnova, L. Håkansson, T. Lagö and I. Claesson, Investigation of the Dynamic Properties of a Milling Tool Holder, Research Report No 2009:07, Blekinge Institute of Technology,ISSN: 1103-1581, November, 2009.
  2. M. Larsson, S. Johansson, L. Håkansson and I. Claesson, Performance Evaluation of a Module Configured Active Silencer for Robust Active Noise Control of Low Frequency Noise in Ducts, Research
  3.  H. Åkesson, T. Smirnova, T. Lagö and L. Håkansson, "Analysis of Dynamic Properties of Boring Bars Concerning Different Boundary Conditions", Research Report No 2007:06, Blekinge Institute of Technology, ISSN: 1103-1581, March, 2007.Report No 2008:06, Blekinge Institute of Technology, ISSN:1103-1581, T.
  4. Smirnova, H. Åkesson and L. Hºakansson "Modeling of an Active Boring Bar", Research Report No 2007:14, Blekinge Institute of Technology, ISSN: 1103-1581 December 2007.6October, 2008.
  5. Linus Andrén and Lars Håkansson, "Active Vibration Control of Boring Bar Vibrations", Research Report, Blekinge Institute of Technology, ISSN 1103-1581, Aug. 2004

Conference Papers

  1. Viet T. Vu, Thomas K. Sjögren, Mats I. Pettersson and Lars Håkansson, "An Approach to Suppress RFI in Ultrawideband Low Frequency SAR", In Proceedings of the IEEE International Radar 2010 Conference , Washington DC, USA, May 10-14, 2010.
  2. I. Gustavsson, K. Nilsson, Johan Zackrisson and L. Håkansson, "Open your laboratories for remote access to other experimenting for students on-campus or o®-campus 24/7", In Proceedings of the 1st WIETE Annual Conference on Engineering and Technology Education, Pattaya, Thailand, 22 – 25 February 2010.
  3.  H. Åkesson, A. Sigfridsson, T. Lagö, I, Andersson and L. Håkansson, "Noise Source Identi¯cation and Active Control in a Water Turbine Application", The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2009 and MFPT 2009, , Dublin, Ireland, 23-25 June 2009.
  4. M. Larsson, S. Johansson, S.M.Muddala, A.E. Mohamed Gafar, L. Hºakansson, J. Tarkka and M. Sandor, "An Initial Study on Applying Active Noise Control to an Insulated Box Fan Used in Ventilation System Applications", In Proceedings of the Sixteenth International Congress on Sound and Vibration, ICSV16, Krakow, Poland, 5-9 July, 2009.
  5. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "Investigation Concerning Dynamic Properties of an Active Boring Bar Regarding its Performance by Means of 1-D Finite Element Models", In Proceedings of the Sixteenth International Congress on Sound and Vibration, ICSV16, Krakow, Poland, 5-9 July, 2009.
  6. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "Simulation of Active Suppression of Boring Bar Vibrations by Means of Boring Bars 1-D Finite Element Model", In Proceedings of the 2009 International Symposium on Active Control of Sound and Vibration, ACTIVE 2009, Ottawa, Canada, 20-22 August, 2009.
  7. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "Investigations of Possibilities of Improvement of a Finite Element Model of an Active Boring Bar", International Modal Analysis Conference-XXVII(IMAC-XXVII), Orlando, Florida USA, 9-12 February 2009.
  8.  H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "Investigation of the Dynamic Properties of a Milling Structure; Using a Tool Holder with Moderate Overhang", International Modal Analysis Conference-XXVII(IMAC-XXVII), Orlando, Florida USA, 9-12 February 2009.
  9. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "Developments Steps of an Active Boring Bar for Industrial Application", In Proceedings of the 37th International Congress and Exposition on Noise Control Enginering, inter-noise 2008, Shanghai, China, 26-29 October, 2008.7
  10. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "Dynamic Properties of Tooling Structure: Hydraulic Clamping versus Standard Screw Clamping in the Lathe Application", In Proceedings of the The Ninth International Conference on Computational Structures Technology, CST2008, Athens, Greece, 2-5 September, 2008.
  11. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "ADVANTAGEOUS AND DRAWBACKS USING DIFFERENT SENSORS IN FEEDBACK CONTROL IN ACTIVE BORING BAR APPLICATIONS", In Proceedings of the Fifteenth International Congress on Sound and Vibration,ICSV15, Daejeon, Korea, 6-10 July, 2008.
  12. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "INVESTIGATION CONCERNING ACTUATOR POSITION IN AN ACTIVE BORING BAR REGARDING ITS PERFORMANCE BY MEANS OF "3-D" FINITE ELEMENT MODELS", In Proceedings of the Fifteenth International Congress on Sound and Vibration, ICSV15, Daejeon, Korea, 6-10 July, 2008.
  13. T. Smirnova, H. Åkesson, I. Claesson, L. Håkansson and T. Lagö, "Modeling a Clamped Boring Barusing Euler-Bernoulli Beam Models with Various Boundary Conditions", In Proceedings of MMWP08 - The third International Conference on Mathematical Modelling of Wave Phenomena, Växjö, Sweden, 9-13 June, 2008.
  14. I. Gustavsson, J. Zackrisson, J. StrÄom Bartunek, K. Nilsson, L. Hºakansson, I. Claesson and T. Lagö,"Telemanipulator for Remote Wiring of Electrical Circuits", In proceedings of REV 2008 International Conference on Remote Engineering and Virtual Instrumentation, Dusseldorf, Germany, 22-25 June 2008.
  15.  I. Gustavsson, M. Pettersson, L. Håkansson, T. Lagö, and I. Claesson, "Gör ingenjörsutbildningen attraktiv genom att öka det experimentella inslaget ", Ingenjörsutbildningarnas utvecklingskonferens, Royal Institute of Technology, Stockholm, Sweden, November 26-27, 2008.
  16.  I. Gustavsson, J. Zackrisson, Kristian Nilsson, Javier Garcia-Zubia, L. Håkansson, I. Claesson, and T. Lagö, "A Flexible Instructional Electronics Laboratory with Local and Remote Lab Workbenches in a Grid", Proceedings of the 2nd International Workshop on e-learning and Virtual and Remote Laboratories, Potsdam, Germany, February 14 - 15, 2008.
  17. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "Estimation of an active boring bar's control path FRF:s by means of a "3-D" FE model of the system "boring bar - actuator -clamping house" with Coulomb friction", In Proceedings of the The Ninth International Conferenceon Computational Structures Technology, CST2008, Athens, Greece, 2-5 September, 2008.
  18. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "Investigation of the Dynamic Properties of a Passive Damped Boring Bar", In proceedings of Adaptronic Congress 2008, Berlin, Germany, 20 - 21 May, 2008.
  19. M. Larsson, S. Johansson, L. Hºakansson and I. Claesson, "A FEEDFORWARD ACTIVE NOISE CONTROL SYSTEM FOR DUCTS USING A PASSIVE SILENCER TO REDUCE ACOUSTIC FEEDBACK", In Proceedings of the Fourteenth International Congress on Sound and Vibration,ICSV14, Cairns, Australia, 9-12 July, 2007.
  20. T. Smirnova, H. ºAkesson, L. Hºakansson, I. Claesson and T. LagÄo, "INITIAL EXPERIMENTS WITH A FINITE ELEMENT MODEL OF AN ACTIVE BORING BAR", In Proceedings of the Fourteenth International Congress on Sound and Vibration, ICSV14, Cairns, Australia, 9-12 July, 2007.
  21. M. Nilsson, J. Nordberg, L. Håkansson and I. Claesson, "Feature Extraction and Classi¯cation Approaches in Condition Based Monitoring", In proceedings ofWCEAM-CM2007 SecondWorld Congress on Engineering Asset Management and Fourth International Conference on Condition Monitoring, 11-14 June, Harrogate, England, 2007. 8
  22. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "Vibration in Turning and the Active Control of Tool Vibration", In proceedings of WCEAM-CM2007 Second World Congress on Engineering Asset Management and Fourth International Conference on Condition Monitoring, 11-14 June, Harrogate, England, 2007.
  23. T. Lagö, I. Claesson and L. Håkansson, "Overview on Adaptronics and the Future with Smart Embedded Systems", In proceedings of Adaptronic Congress 2007, Gttingen, Germany, 23 - 24 May, 2007.(keynote)
  24. I. Gustavsson, J. Zackrisson, L. Håkansson, I. Claesson and T. LagÄo, "The VISIR project - an Open Source Software Initiative for Distributed Online Laboratories", In proceedings of REV 2007 International Conference on Remote Engineering and Virtual Instrumentation, Porto, Portugal 25-27 June 2007.
  25. J. Zackrisson, I. Gustavsson, and L. Håkansson, "An Overview of the VISIR Open Source Software Distribution 2007", In proceedings of REV 2007 International Conference on Remote Engineering and Virtual Instrumentation, Porto, Portugal 25-27 June 2007.
  26.  Martin Larsson; Sven Johansson; Lars Håkansson; Ingvar Claesson "A SYSTEM IMPLEMENTATION OF AN ACTIVE NOISE CONTROL SYSTEM COMBINED WITH PASSIVE SILENCERS FOR IMPROVED NOISE REDUCTION IN DUCTS" proc. Fan Noise, Lyon, France, 2007.
  27. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "INVESTIGATION OF THE DYNAMIC PROPERTIES OF A BORING BAR CONCERNING DIFFERENT BOUNDARY CONDITIONS", In Proceedings of the Fourteenth International Congress on Sound and Vibration, ICSV14,Cairns, Australia, 9-12 July, 2007.
  28. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "Accurate FE-modeling of a Boring Bar Correlated with Experimental Modal Analysis", International Modal Analysis Conference-XXV(IMAC-XXV), Orlando, Florida USA, 19 22 February 2007.
  29. T. Smirnova, H. Åkesson, L. Håkansson, I. Claesson and T. Lagö, "Investigation of Boring Bar Mode Shape Rotation by Experimental Modal Analysis in Correlation with Finite Element Modeling", In proceedings of ISMA2006 International Conference on Noise and Vibration Engineering, Leuven, Belgium, 18 - 20 September, 2006.
  30. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson, A. Sigfridsson,T. Svensson and T. Lagö, " Active Boring Bar Prototype Tested in Industry", In Proceedings of the Adaptronic Congress 2006, Göttingen, Germany, 3 - 3May, 2006.
  31.  H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson, and T.Lagö, "Comparison between different controllers when having abrupt changes in a process", In Proceedings of Active 2006, Adelaied, Ausralia,18-20 September, 2006.
  32. M. Larsson, S. Johansson, L. Håkansson and I. Claesson, "EXPERIMENTAL INVESTIGATIONS OF DIFFERENT MICROPHONE INSTALLATIONS FOR ACTIVE NOISE CONTROL IN DUCTS", In Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13, Vienna, Austria, 2 - 6 July, 2006.
  33. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson, A. Sigfridsson, T. Svensson and T. LagÄo, "A First Prototype of an Active Boring Bar Tested in Industry", In Proceedings of the Thirteenth InternationalCongress on Sound and Vibration, ICSV13, Vienna, Austria, 2 - 6 July, 2006.
  34. I. Gustavsson, J. Zackrisson, H. ºAkesson, L. Hºakansson, and T. LagÄo,"An Instructional Electronics Laboratory Opened for Remote Operation and Control", In Proceedings of the ICEE 2006 Conference in San Juan, Puerto Rico, July 23 - 28, 2006.
  35. I. Gustavsson, J. StrÄom Bartunek, J. Zackrisson och L. Hºakansson, "How to use the open labatories at Blekinge Institute of Technology", tutorial at REV 2006, Maribor, Slovenia, June 29 - 30, 2006.
  36. T. Smirnova, H. ºAkesson, L. Hºakansson, I. Claesson and T. LagÄo, "IDENTIFICATION OF SPATIAL DYNAMIC PROPERTIES OF THE BORING BAR BY MEANS OF FINITE ELEMENT MODEL: COMPARISON WITH EXPERIMENTAL MODAL ANALYSIS AND EULER-BERNOULLI MODEL", In Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13, Vienna, Austria, 2 - 6 July, 2006.
  37. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and T. Lagö, "Investigation of Boring Bar Mode Shape Rotation by Experimental Modal Analysis in Correlation with Finite Element Modelling", Noise and Vibration Engineering Conference, ISMA, Leuven, Belgium, 18 - 20 September 2006.
  38. H. Åkesson, I. Gustavsson, J. Zackrisson, L. Håkansson, I. Claesson and T. Lagö, "Vibration Analysis of Mechanical Structures over the Internet Integrated into Engineering Education", submitted for publication in Proceedings of the 2006 American Society for Engineering Education Annual Conference & Exposition, Chicago, Ilinois, USA, June 18-21, 2006.
  39. I. Gustavsson, J. Zackrisson, H. ºAkesson och L. Hºakansson, "Experimentera hemma med utrustningeni universitetens vningslaboratorier", den 4:e Pedagogiska inspirationskonferensen, Lund, 1 juni 2006.
  40. B. Sällberg, L. Håkansson and I. Claesson, "Active Noise Control for Hearing Protection using a Lowpower Fixed Point Digital Signal Processor", In Proceedings of the International Workshop on Acoustic Echo and Noise Control (IWAENC), Eindhoven, Netherlands, September 12 - 15, 2005.
  41. H. Åkesson, T. Smirnova, L.Håkansson and I. Claesson, "ANALOG AND DIGITAL APPROACHES OF ATTENUATION BORING BAR VIBRATIONS DURING METAL CUTTING OPERATIONS", In Proceedings of the Twelfth International Congress on Sound and Vibration, ICSV12, Lisbon, Portugal, 11 - 14 July, 2005.
  42. M. Larsson, S. Johansson, L. Håkansson and I. Claesson, "MICROPHONE WINDSCREENS FOR TURBULENT NOISE SUPPRESSION WHEN APPLYING ACTIVE NOISE CONTROL TO DUCTS", In Proceedings of the Twelfth International Congress on Sound and Vibration, ICSV112, , Lisbon, Portugal, 11 - 14 July, 2005.
  43. H. Åkesson, A. Brandt, L. Håkansson, T. Lagö, I. Claesson, "Operational Modal Analysis of a Boring Bar During Cutting", In proceedings of the 1st International Operational Modal Analysis Conference,IOMAC, Copenhagen, Denmark, April 26-27, 2005.
  44. H. Åkesson, T. Smirnova, L. Håkansson, I. Claesson and Thomas Lagö, "Analog versus Digital Control of Boring Bar Vibration", Accepted for publication In proceedings of the SAE World Aerospace Congress, WAC, Dallas, Texas, USA, October 3-6, 2005.
  45. I. Gustavsson, J. Zackrisson, H. Åkesson and L. Håkansson, "A Flexible Remote Electronics Laboratory", In proceedings of the International Remote Engineering Virtual Instrumentation Symposium, REV2005, Bukarest, Romania, 30 June-1 July, 2005.
  46. H. Åkesson, I. Gustavsson, L. Håkansson, I. Claesson, "Remote Experimental Vibration Analysis of Mechanical Structures over the Internet", In proceedings of the 2005 ASEE Annual Conference & Exposition, Portland, Oregon, USA,June 12-15, 2005.
  47. I. Gustavsson, T. Olsson, H. ºAkesson, J. Zackrisson, L Hºakansson, "A Remote Electronics Laboratory for Physical Experiments using Virtual Breadboards", In proceedings of the 2005 ASEE Annual Conference & Exposition, Portland, Oregon, USA,June 12-15, 2005.10
  48. B. Sällberg, L. Håkansson and I. Claesson, "Active Noise Control for Hearing Protection using a Low power Fixed Point Digital Signal Processor", In Proceedings of the International Workshop on Acoustic Echo and Noise Control (IWAENC), Eindhoven, Netherlands, September 12 - 15, 2005.
  49. L. Andrén, L. Håkansson and I. Claesson, "ACTUATOR PLACEMENTS AND VARIATION IN THE CONTROL PATH ESTIMATES IN THE ACTIVE CONTROL OF BORING BAR VIBRATIONS", In Proceedings of the Eleventh International Congress on Sound and Vibration, ICSV11, St. Petersburg, Russia, 2004.
  50. J. Scheuer, L. Håkansson and I. Claesson, "MODAL ANALYSIS OF A BORING BAR USING DIFFERENT CLAMPING CONDITIONS", In Proceedings of the Eleventh International Congress on Sound and Vibration, ICSV11, St. Petersburg, Russia, 2004.
  51. L. Håkansson and I. Claesson, "A Solution to Control Path Di®erences in The Feedback Filtered-x LMS Control of Boring Bar Vibration", Inter-Noise 2004, August 22-25, 2004.
  52. A. Brandt, L. Håkansson and I. Claesson, "CYCLOSTATIONARY ANALYSIS OF BORING BAR VIBRATIONS", International Modal Analysis Conference-XXI(IMAC-XXI), Dearborn, Michigan, February 2004.
  53. L. Andrén, L. Håkansson and I. Claesson, \Active Control of Boring Bar Vibrations Using the Leaky Feedback Filtered X-LMS" IEEE International Conference on Mechatronics and Machine Vision in Practice, 2003, M2VIP'2003, Perth, Australia, 9-11 December 2003, reviewed paper.
  54. L. Andrén, L. Håkansson and I. Claesson, "PERFORMANCE EVALUATION OF ACTIVE VIBRATION CONTROL OF BORING OPERATIONS USING DIFFERENT ACTIVE BORING BARS", In Proceedings of the Tenth International Congress on Sound and Vibration, ICSV10, Stockholm, Sweden, 2003.
  55. L. Håkansson, A. Brandt, T.L. Lagö and I. Claesson, "Modal Analysis and Operating Detection Shapes of a Boring Bar", International Modal Analysis Conference-XXI(IMAC-XXI), February 2003.
  56. L. Pettersson, L. Håkansson, I. Claesson and S.Olsson, "Active Control of Internal Turning Operations Using a Boring Bar", IEEE International Conference on Mechatronics and Machine Vision in Practice, 2002, M2VIP'2002, Chiang Mai, Thailand, 10-12 September 2002, reviewed paper.
  57. L. Pettersson, L. Håkansson, I. Claesson and S.Olsson, "Active Control of Boring Bar Vibration in Cutting Operations", In Proceedings of the Ninth International Congress on Sound and Vibration, ICSV9, Orlando, USA, July 8-11, 2002.
  58. S. Johansson, L. Håkansson, P. Persson and I. Claesson, \Active Control Methods for Reducing Lateral Vibrations in High-Speed Trains", GRACM2002, 27-29 June 2002, Greece.
  59. T.L. Lagö, S. Olsson, L. Håkansson and I. Claesson, "Design of an E±cient Chatter Control System For Turning and Boring Applications", International Modal Analysis Conference-XX(IMAC-XX), February 2002.
  60. T.L. Lagö, S. Olsson, L. Håkansson and I. Claesson, "Performance of a Chatter Control System For Turning and Boring Applications", The 4th GRACM CONGRESS ON COMPUTATIONAL MECHANICS, GRACM2002, 27-29 June 2002, Greece.
  61. S. Johansson, L. Håkansson, P. Persson and I. Claesson, "THE MULTIPLE-INPUT/SINGLE-OUTPUT FEEDFORWARD CONTROL OF LATERAL VIBRATION IN A HIGH-SPEED TRAIN CAR", In Proceedings of the Ninth International Congress on Sound and Vibration, ICSV9, Orlando, USA, July 8-11, 2002.11
  62. L. Pettersson, L. Håkansson and I. Claesson, "Adaptive Control of Machine-Tool Vibration Based On a Active Tool Holder Shank with an Embedded Piezo Ceramic Actuator", the 30th International Congress and Exhibition on Noise Control Engineering - Inter-Noise 2001, August 27-31, 2001, Invited.
  63. L. Pettersson, L. Håkansson, I. Claesson and S.Olsson, "Active Control of Machine-Tool Vibration in a CNC Lathe Based on an Active Tool Holder Shank with Embedded Piezo Ceramic Actuators", In Proceedings of the Eight International Congress on Sound and Vibration, Hong Kong, China, July, 2001.
  64. L. Pettersson, L. Håkansson, I. Claesson and S.Olsson, "Active Control of Machine-Tool Vibration in Cutting Operations in a General Lathe", IEEE International Conference on Mechatronics and Machine Vision in Practice, 2001, M2VIP'2001, Hong Kong 27-29 August, 2001, Invited.
  65. L. Pettersson, L. Håkansson, I. Claesson and S.Olsson, "Active Control of Machine-Tool Vibration in Cutting Operations using Piezo Ceramic Actuators" SVIB Nordic Vibration Research 2001,
  66. P. Persson, S. Johansson, L. Hºakansson, I. Claesson, T. Samuels, "FEEDBACK-LMS CONTROL OF LATERAL VIBRATION IN A TRAIN CAR", In Proceedings of the Eight International Congress on Sound and Vibration, Hong Kong, China, July, 2001.
  67. P. Persson, S. Johansson, L. Håkansson, I. Claesson, "Lateral Vibration Reduction in a Train Car Using Active Control Technologies", In proc. of SVIB konferens, AU5, Stockholm, 2001.
  68. T. Samuels, P. Persson, S. Johansson, L. Hºakansson and I. Claesson, "Active control of lateral vibration in a structurally modi¯ed train car", In Proceedings of the seventh International Congress on Sound and Vibration, Garmisch-Partenkirchen, Germany, July 2000.
  69. L. Håkansson, I. Claesson, L. Pettersson, T LagÄo, "Embedded Piezoceramic Actuators in a Tool Holder Shank for the Active Control of Machine-tool Vibration", The 1999 International Symposium on Active Control of Sound and Vibration, ACTIVE99, Fort Lauderdale, USA, 2-4 December1999.
  70. Linus Pettersson, Lars Håkansson, Ingvar Claesson, Thomas Lagö, "Piezo Ceramic Actuators versus High Magnetostrictive Actuators in the Active control of Tool Vibration", Invited paper, FORUM ACUSTICUM, Berlin, Germany 14-19 Mars 1999.
  71. Lars Håkansson, Ingvar Claesson, Linus Pettersson, Thomas Lag, "Active Control Machine Tool Chatter Embedded Piezo Ceramic Actuators in Tool Holder Shank", ASME 17th Biennial Conference on Mechanical Vibration and Noise, Las Vegas, USA, 12-16 September 1999, reviewed paper.
  72. I. Claesson, L. Håkansson and T. Lagö,"Robust Control of Machine-Tool Vibration in a Lathe" In Proceedings of the Sixth International Congress on Sound and Vibration, Lyngby, Denmark, (July,1999).
  73. L. Håkansson, I. Claesson, P-O. Sturesson, T. L. Lagö, "Active Control of Chatter in Turning The Origin of Chatter", IMAC-XVII, International Modal Analysis Conference, Orlando Florida, February,1999.
  74. L. Håkansson, I. Claesson, T. Lagö, "Active Control of Machine Tool Chatter", IMAC-XVII, International Modal Analysis Conference, Orlando Florida, February, 1999.
  75. L. Håkansson, I. Claesson, J.-E. Ståhl, M. Andersson, "Fix-Number Realization of Adaptive Control of Machine-Tool Vibration", Invited lecture, Seventh International Colloquium on Numerical Analysis and Computer Science with Applications, 1998.
  76. L. Håkansson, I. Claesson, J.-E. Ståhl, M. Andersson, "Active Control of Tool Vibration In Turning", Technology Integrated Manufacturing Equipment - Conference Report, Department of Production and Materials engineering, Lund Institute of Technology, Lund University, 1998. 12
  77. I. Claesson, L. Håkansson, "Active Control of Machine-Tool Vibration in a Lathe", In Proceedings of the Fifth International Congress on Sound and Vibration, Adelaide, December, 1997.
  78. L. Håkansson, P-O. Sturesson and I. Claesson, "Active Control of Machine-Tool Vibration" In Pro-ceedings of the 6th International Conference on Manufacturing Engineering, Melbourne, Australia, (29 Nov. - 1 Dec., 1995).
Redigera
Share Dela