Alexander Barlo

Alexander Barlo

Doktorand

alexander.barlo@bth.se

Institutionen för maskinteknik, Rum J3411

0455-385520

Ladda ner:

CV Pressbild

Erfarenhet

  • Projektledare, PDM Technology Group, Aalborg, Danmark (08.2019 – 03.2021)
  • Examensarbete, Volvo Cars Body Components, Olofström, Sverige (09.2018 – 06.2019)

Utbildning

  • Ph.D. Maskinteknik, Blekinge Tekniska Högskola, Sverige (2021-Nu)
  • M.Sc. Eng. Tillverkningsteknik, Aalborg Universitet, Danmark (2017-2019)
  • B.Sc. Eng. Maskin- och tillverkningsteknik, Aalborg Universitet, Danmark (2014-2017)

Projekt och publikationer

Pågående projekt
I-STAMP - Intelligent and Sustainable Stamping Processes using Hybrid Control Strategies together with Process Monitoring | 2022-
LIGHTer Ph.D. Network | 2023-
Avslutade projekt
PREDICT - Failure Prediction of Complex Load Cases in Sheet Metal Forming | 2020-2023
Utvalda publikationer
Failure Prediction of Complex Load Cases in Sheet Metal Forming: Emphasis on Non-Linear Strain Paths, Stretch-Bending and Edge Effects
Nyligen publicerat
Quoc Tuan Pham, Md. Shafiqul Islam, Alexander Barlo, Mats Sigvant, "An evaluation method for experimental necking detection of automotive sheet metals", IOP Conference Series-Materials Science and Engineering, ISSN 1757-8981, 42ND CONFERENCE OF THE INTERNATIONAL DEEP DRAWING RESEARCH GROUP, IOP PUBLISHING LTD, 2023
Alexander Barlo, Mats Sigvant, V. Kesti, Md. Shafiqul Islam, Quoc Tuan Pham, Johan Pilthammar, "Determination of Edge Fracture Limit Strain for AHSS in the ISO-16630 Hole Expansion Test", IOP Conference Series-Materials Science and Engineering, ISSN 1757-8981, 42ND CONFERENCE OF THE INTERNATIONAL DEEP DRAWING RESEARCH GROUP, IOP PUBLISHING LTD, 2023
Alexander Barlo, "Failure Prediction of Complex Load Cases in Sheet Metal Forming", Blekinge Institute of Technology Licentiate Dissertation Series, ISSN 1650-2140, EISSN 12154, EISSN 3, Blekinge Tekniska Högskola, 2023
Quoc Tuan Pham, Md. Shafiqul Islam, Alexander Barlo, Mats Sigvant, Lluís Pérez Caro, Kristoffer Trana, "Modeling the strain localization of shell elements subjected to combined stretch–bend loads", Thin-walled structures, ISSN 0263-8231, EISSN 1879-3223, Vol. 188, Elsevier, 2023
Alexander Barlo, Mats Sigvant, Md. Shafiqul Islam, Ll Perez, E. Olofsson, M. Al-Fadhli, Quoc Tuan Pham, Johan Pilthammar, E-L Odenberger, "Proposal of a New Tool for Pre-Straining Operations of Sheet Metals and an Initial Investigation of CR4 Mild Steel Formability", IOP Conference Series-Materials Science and Engineering, ISSN 1757-8981, 42ND CONFERENCE OF THE INTERNATIONAL DEEP DRAWING RESEARCH GROUP, IOP PUBLISHING LTD, 2023

Snabba fakta

PUBLIKATIONER PER ÅR

37

ANTAL CITERINGAR

ANTAL CITERINGAR PER ÅR

Har du en fråga? Skriv den här, så återkommer vi så snart som möjligt!
×